Profi Kernbohrset: Cedima Bohrmotor C-BMS-350 und Bohrständer P-500 inklusive Stahlbetonbohrkrone 112 mm
Mit einer Motorleistung von 3,5 kW und einer Bohrtiefen von bis zu 350 mm ermöglicht der C-BMS-350 Bohrmotor von Cedima problemloses Bohren in fast allen Materialien. Die Kernbohrmaschine ist sowohl für das Nassbohren als auch für das Trockenbohren geeignet. Der an der Maschine angebrachte Pulstronic zeigt Überlastungsrückmeldungen an und eine Rutschkupplung fängt übermäßige Belastungen ab. Der passende Kernbohrständer P-500 verfügt über einen integrierten Feinvorschub im Führungsschlitten und sorgt damit für ein leichtes Arbeiten bei großen Durchmessern. Durch die Schnellkupplung lässt sich der Bohrmotor schnell am Bohrständer lösen, bzw. befestigen.
Zusätzlich zu dem Cedima Bohrmotor C-BMS-350 und dem Cedima Bohrständer P-500 enthält dieses preisgünstige Set eine hochwertige Cedima Diamant-Bohrkrone 112 mm für Beton, Stahlbeton sowie Mauerwerk. Die Bohrkrone mit 450 mm Nutzlänge und 1 1⁄4“ UNC-Muffe ist bedingt auch im Trockenschnitt einsetzbar. Sie verfügt über einen hohen Vorschub und eine gute Standzeit. Die 10 Turbosegmente haben eine Größe von 3,5 x 10 x 24 mm.
Eigenschaften Cedima Bohrmotor C-BMS-350:
- Pulstronic (Überlastungsmeldung)
- elektrischer Überlastschutz
- Softstart
- Serviceanzeige
- Rutschkupplung
- integrierte Ölpumpe zur besseren Kühlung und Schmierung des Getriebes
- Cedima Artikelnummer: 30001109
- EAN: 4023138152553
Spezifikationen Bohrmotor C-BMS-350 |
Bestell-Nr. |
30001109 |
EAN |
4023138152553 |
Bohr - Ø von - bis (mm)
(in abrasiven Materialien) |
45-350 |
Drehzahl min -1
|
270/ 480/ 780 |
Motor-Leistung kW |
3,5 |
Anschluss-Spannung V/ Hz |
230/ 50 ~ 60 |
Anschlussgewinde |
1 1/4" UNC |
Passende Bohrständer/ -säulen |
P-250 P-3000 P-500 P-6000 |
Länge (mm) Transport/Einsatz |
545 |
Breite (mm) Transport/Einsatz |
150 |
Höhe (mm) Transport/Einsatz |
210 |
Gewicht (kg) |
11,8 |
Eigenschaften Cedima Bohrständer P-500:
- Führungsschiene aus Aluminiumprofil
- Doppelabstützung der Säule nach hinten
- stabiler Dübelfuß mit integrierten Verstellschrauben
- Vorschubschlitten mit Rollenführung und durch Exzenter leicht einstellbar
- Säule stufenlos bis 45° verstellbar
- Schlitten arretierbar, integrierter Feinvorschub im Führungsschlitten 1:3,3 für leichteres Arbeiten bei großen Bohrdurchmessern
- Schnellkupplung ermöglicht schnelle und einfache Montage/ Demontage vom Bohrmotor am Bohrständer
- optionaler Radanbausatz
- inkl. Anbauplatte (für elektrische Bohrmotoren) Typ U
- Cedima Artikelnummer: 30001107
- EAN: 4023138152546
Spezifikationen Bohrständer P-500 |
max. Bohr-Ø (mm) |
500 |
max. Bohrhub (mm) |
690 |
Gewicht (kg) |
17,9 |
Länge (mm) |
1005 |
Breite (mm) |
245 |
Höhe (mm) |
425 |
Schrägbohren |
bis 45° stufenlos |
Geeignet für Bohrmotoren |
DK-32 EL, C-BMS-350, C-BBM33L Extra, C-DX5L, DK-52 |
Eigenschaften Nass Bohrkrone:
- Nassschnitt
- für Kernbohrmaschinen und Kernbohrsysteme
- Turbo-Segment
- hoher Vorschub
- hohe Standzeit
- lasergeschweißt
- Nutzlänge: 450 mm
- Segmenthöhe: 10 mm
- Segmentbreite: 3,5 mm
- Segmentanzahl: 10
- Anschluss: 1 1/4" UNC Muffe
- Durchmesser: 112 mm
- empfohlene Drehzahl: 682/min
Optimal geeignet für: Altbeton, Beton, Betonprodukte, HBS-Stein Poroton, Kalksandstein hochverdichtet, Leichtbeton, Quadro-Block, Waschbeton, Stahlbeton mit geringer und mittlerer Armierung sowie mittelharter Zuschlagsstoffe
PDF